Introduce yourselves here..

Hey, Im Mike, a college student, studying Aerospace Engineering. Im still trying to save up for one of these...Im a little short on $$ for these...but I'll hopefully get one soon!

hello im Trent and work at PSI Motorsports, Inc. in PA. Ive had my car tuned a few times by Jeremy F using HP Tuners and i love the software. We mostly tune Ford cars here but my boss wants to get into the GM stuff. We are an authorized SCT dealer and use that for the ford cars but he plans on buying hp tuners for the GM ones.

Hello, My name is Jeremy. My vehicle and mods are listed in my signature. I'm a member of pt.net and silveradoss.com. My tuner Zippy has this software so I'm purchasing so he can email me my tune and so I can learn how to tune. I hope to learn a lot from the site.

Hello, names' Khaled. Currently studying dentistry. I own a Commdore VE SS (Lumina SS) and I've yet to tune my car, I'll probably leave that to a pro for now but I do intend to learn :)

Hey All. I'm Andrew. New to HPT but have yet to fully understand all the graphs. Anyone care to help mentor?

Hi my name is Daniel I'm from the Netherlands and I'm doing a engine swap
A dohc 3.4 engine LQ1 Chevrolet 97 and put it in the fiero GT 87 so now i need some good info for tuning the engine,
I have just fried my CM needed to delete the automatic gearbox using a interface from a Friend of mine the name off the interface uuuummmmm ghe ghe not in portend it's not from here.the thing is I need a new PCM and a new interface with all the software there is for tuning my ride

Hello all my name is Maurice I am new to tunning and I just recived hptunners and am very excited to see what all I can do to my 2005 ss s/c cobalt .got a few mods on my car so I hope to open up all my car has to offer.

New to tuning i got hp tuners a couple of weeks ago and just trying to learn off the scanner just looking for lots of help
currently trying to learn how to tune my silverado 5.3 and hopefully a yukon 5.3 to drop into a impala

My name is Steve and I have a supercharged and then some 98 S-10 SS 4.3 running SD

Theres a vid below if the sig works.

Waiting for my HP tuners to show up in the mail, interested in playing with the 98 beta, if it still is a beta. And eventually converting over to an 01' ecm

Hello. My name is John. I'm here to learn about tuning so I can make my car better and help my friends with theirs. It might be a while before I can get HPTuners, but I'm going to be learning in the mean time.:hi:

Hi, my name is Chad. I am a PC Technician, and I own a 2002 Trans Am Firehawk. My brother has been using HP Tuners on his 2000 Grand Am GT1 and I have seen some amazing stuff. I look forward to receving my own programmer this coming week, and getting into tuning my own car. I think I have a lot of reading to do in the next while!

Hello all,
My name is Dominic. I having been tuning cars for upward of 13 years. I have owned many 70's chevys and pontiacs. Lately I have been building 600hp, turbocharged, daily driven Subarus that get 28-30mpg hwy. My next project is a twin turbo small block in my 57 chevy 4x4.
I currently have my own business as an independent tuner and engine builder.
I come to HPTuners because I want become a better tuner with the new fuel injected domestics. I am also very excited about the new releases to include the Big 3's diesel trucks.
HPTuner is a bit different from the many other systems I tune with already, so I'll probably be asking a lot of questions. I tuned a supercharged Vette with HPTuner last week and I wasn't 100% satisfied with the results. I'm very confident that my lack of knowledge of the software was the issue and I hope to rectify that.
Thank you all for your patience and have a great day.

Hey Chad, nice to see you up already!! Look foward to seeing you around bro!

Paul :)

What's up, my name is Jay and I am opening a new shop in South Brunswick, NJ. I am trying to get a hold of Bill@hptuners. We are very interested in being a tuning shop and only about 15 minutes from Trenton. We are getting a Mustang Dyno as well. Give me an email Bill!

Thanks,
Jay

Hello, I'm David and i'm addicted to horsepower

that and i want to learn more about HPtuners to support my habbit

Hey Yo. Arthur Here.
My specialty is, pushing copious amounts of paper in circles from Monday to Friday and most weekends. ;) I run an Autmototive diagnostic and (slight) performance shop with my father. Just purchaced VCM Pro, im planning on using it for business and personal use.
I was fortunate enough to attend an excellent 2 day EFI seminar taught by Mr. Banish (eficalibrator) in Los Angeles a few weeks back. Plenty of information and many of my foggy area's were clarified.
Thanks again Greg for the great weekend.

Im hopeing to use this site as an information database, for any questions or relative postings I may have.
Cheers

Hi i'm Alex from Miami. I got HPTuners because I've always liked the technical aspects of making cars go fast. I'm still very confused about a lot but hopefully this will subside as time goes on. Just finished my LTFT Training and next is WOT. Wish me luck :)

Hey All,
I'm an aerospace engineer who grew up during the tail end of the muscle car era. I've always been into muscle, and I've had several fast cars and sports cars over the years, my favorite being a totally stock-looking stealth V8 Vega wagon that delivered totally unexpected surprises to owners of "fast" cars at stoplights in the early 80's. It had a rebuilt Pontiac 400 cid small block with aftermarket heads, intake, and a fairly hot cam under the obligatory Holley four-barrel breathing through Hooker headers and glass packs. "Tuning" these cars was a whole 'nuther ballgame compared with today.

Now I've got an '06 GTO that I'm in the process of modding and I'd like to get proficient at tuning it myself. Don't want to run to a tuner every time I install an upgrade. I'll be hangin' around here for a good while, I reckon.

Hi ,new HPTuner here . I live in N.E. Tn. and own an 06 Chevy Silverado with a Magnacharger , headers and an m10 6spd. trans.
Keith , thanks for fixing it so that I can post , you may regret it LOL.
Ron

New to this board. Stumbled along and decided to join. The boys and I have been pulling our hair out over at Auroraclubna trying to find someone that can get into the ECU for the 4.0L Northstar. Any info would be very helpful to us all.