-
Converter o
Update, the CircleD converter won?t be in for another month so I dropped the exhaust and welded in the bung for an AEM 300 WB. Got it working and now I?m working on making a custom air intake including a bit larger MAF housing. I?ll be tuning the MAF when I finish it and install it.
-
New to the site.
Just bought a new MPVI2+ to tune my 2007 Tahoe LTZ 5.3L 4x4.
Engine: Built 5.3L, Balanced, 3.80" custom Wiseco Forged Flat top Pistons, Eagle Forged H-beam Rods, BTR Stage 2 truck cam, DOD delete.
Intake/exhaust: OE Truck (TBSS) intake, Volant Cold Air intake, JBA headers, Flowmaster cat-back exhaust
Fuel: Walbro 470, Holley fuel rails, Aeromotive FPR, 8AN feed and return
Swapped: 6L80e Trans - Circle-D Lvl 3, Circle-D Billet TC
Cooling: Holley "Frostbite" radiator, Silverado oil cooler lines to radiator, Tru Cool Max 40k stacked plate trans cooler.
Not quite back on the road yet. Just fired her up the first time this weekend. Still have some kinks to work out and then tune the engine/trans.
-
Here. here......Baytown, Texas
-
2013 NNBS heads, cam, headers, cai, 6l80, my DD
-
2012 Silverado LTZ 7.5? Lift with 24s on 35s
-
New to this as I just got my software and have been playing with it. I have a 1984 c10 that I have LS swaped with a LY6 6.0 and a 6l90e out of a 2009 2500.Its tough finding info on what to tune on the gen 4 all i am finding is the older pcm for torque control mangement and the settings are no where near the same. Once I get it running my goal is cam it and play with the tune some more.
-
I have a couple trucks....
2014 CCSB - long tubes, cat back, CAI
2003 RCSB - project-- cat back, CAI
1996 RCSB - project -- Doing 5.3 swap currently, lowering, brake upgrades,
-
Greetings all,
2004 Cadillac Escalade LQ9 6.0L all stock right now...
2006 Cadillac Escalade ESV (due to a series of unfortunate events, relegated to parts truck)
-
Hey everyone,
2000 GMC sierra 1500 2wd
p01 ecm, gen3 4.8 with gen 4 rods, th400 swap, single turbo, btr cam
-
08 btr cam here still learning ... need help
-
- 21' Silverado 2500HD High Country
- 6.6L Duramax L5P
- 10 speed Allison tranny
-S&B cold air intake
- 64 mm stealth exhaust
- Full delete
- 5" straight pipe down pipe back
- 3.5" down pipe
-37"x13.50" Ironman tires on 20"x10" rough country rims
- 7" lift
- 5 SWTF tuned
- Fleece high performance fuel/water separator
This is the start of my project still have plans to upgrade the tranny, high flow fuel pump, upgrade the injectors, coolant pipes, trans intercooler, just kinda been learning as I go.... SMH definitely appreciate you guys that have real knowledge and experience messing with this stuff... Im always open to learn and would appreciate any formation shared.
-
2018 1500 LTZ 5.3 Z71
STG 1 Cam
Cold Air Intake
6.2 Intake and TB
Shorty Headers
AFM Delete with Trunion Upgrade
-
trucks is all I do.
03 escalade ext (fresh winter rig as of 3 weeks ago)
17 silverado 2wd/rcsb, L83, c8 manifold/tb, 250 shot.
17 silverado 4wd/ccsb L83, kooks longtubes, circle D 3200, dr. steves lvl3 6l80e.
-
Trucks and cars in our fleet. 2007 CCSB 4x4 LBZ - some mods and my tune, 2007.5 CCFB 4x4 LMM - Some mods and my tune, 2016 Chevy SS (Holden Commodore) 6.2L with mods, built Tim King 6L80 and custom flex fuel tune, 2000 Silverado 5.3 Ext Cab 2wd with my tune on it. We also use VCDS for our multiple VW TDI's and we use VF Tuner for our 5th gen 4Runner tunes. :cool:
-
I'd like to find a mild tune in the repository for a stock 2011 Silverado 5.3, 6 spd Auto, 2WD
If anybody runs across one, please let me know how ro find it once I'm logged in to my HP Tuners account
I just wanted a mild tune with AFM turned off, rev limiter turned up so I can go over 100 MPH when the need arises (can't never tell when you'll have the need to go over 100 ya know :cool: )
-
-
03/04/06 all modded and tuned to some extent
now anybody got a good starting tune for 228/242 cammed 427 with ls3 heads since that's going in my stepside in a month or so,,, ?
-
havent done any "tuning" yet, but hopefully soon....
'02 1500HD
6.0 LQ4
4l80E
14bolt FF rear 4.10 / Detroit Trutrac
-
1-GMC SIERRA HD3500 2008 ,american racing headers , custom exhaust ,custom rims , k&n air intake.
2-Hummer h2 2009 stock
3-GMC Yukon Denali 2013, Long tube headers , y pipe , borla muffler , on the way (hot cam stage 1 )