When I hit the relearn Trans Button on the Hp scanner nothing happens
Quote:
Originally Posted by
sevinn
You just have to sit there and do a brake stand.
I'm about ready to go this route to get the stupid relearn to work.
I don't know what I'm doing wrong.
Temp range 165- 175f
Parking brake on
Foot on brake
engine running
TCM unlocked and tuned
But when I hit the button nothing happens besides a small blue line around the box. No pop-up or any sounds, or anything that would indicate anything is happening.
Relearn Status PID in Channel List
Quote:
Originally Posted by
Tourmoil
I'm about ready to go this route to get the stupid relearn to work.
I don't know what I'm doing wrong.
Temp range 165- 175f
Parking brake on
Foot on brake
engine running
TCM unlocked and tuned
But when I hit the button nothing happens besides a small blue line around the box. No pop-up or any sounds, or anything that would indicate anything is happening.
Make sure you have the relearn status pid in the channels list and monitor that value.
I have used it several times and it works well.