Try making everything except the timing maps like the ones listed in this thread. Then work your timing tables up towards what are posted while logging the car. If it likes more, give it more :)
Printable View
Try making everything except the timing maps like the ones listed in this thread. Then work your timing tables up towards what are posted while logging the car. If it likes more, give it more :)
Yeah it is a really bad one. He likes to mess with the optimum engine torque table too which is a big no no because it is used to calculate internal torque output according to optimum spark and lambda=1.00. It is not a torque limiting table.Quote:
Originally Posted by rage915
term i just sent you a email, please look it over and get back to me asap
Email sent.Quote:
Originally Posted by rage915
You have an email.
subd...
got it, now where from here
Upgrades, lol.
Just read through the first portion. Make sure you log all your changes, and look for knock. Thats the biggest thing to look for.
alright
is .5-1deg of knock ok?
Its not bad, but no knock is way better.
well gona start messing with the car tomorrow, hope alot of you guys are online cuz i think imhave alot of questions and gona need alot of help
If your not sure if something went wrong, its best to park it than to blow something up. Don't forget that.
No it runs great, just running the histograms i still got a bit here and there in maybe 3-5 cells at weird loads. I was going somewhere so i did not change them. the most part it has no knock.
Better than the stock tune on 93 octane it has 3-4* of KR all through the midrange. No knock is better though just pull a degree out in those areas.Quote:
Originally Posted by Cobalt09SS
why do idc only show like 30?
IDC of the LNF or any other GDI motor is kinda meaningless because the injection time and injection window is so much shorter than a port injection motor.Quote:
Originally Posted by elite_cyborg
Question, I turned the Dal up to 399 and can not get any more boost out of the car. It has azzp DP and a K&n Drop in filter. I want to hold 22psi.
Even restricting the wastegate opening with external means the stock turbo runs out of gas at redline. 19 psi is about it at redline for me. When you increase the flow from the exhaust, it's harder to hold pressure but you are making more power if tuned properly.Quote:
Originally Posted by Cobalt09SS
Might be possible with more tables available to us in the future, but raising the DAL's higher won't do it alone.
Are you seeing a spike of ~22-23 then a slight roll off, then it picks back up a lil bit??
If you are catless, try a .045 pill in line and reduce your DAL table like in the Pill Mod thread. Should have no problem breaking 22 then LOL!