HP Tuners 2.25 BETA Release (2011+ Mustang supported + others)

Eric, maybe you'll have an idea for what I should try here. 2013 V6, when I try to upload the stock tune from the PCM I get “Unknown Controllers Detected. Specify or read again” Tried to read again and got the same message. Any clue as to what I should do from here? Had the car here last night for a while and it should be here today for us to try again if we can figure this part out

Quote:

---

Originally Posted by MMGT1

Eric, maybe you'll have an idea for what I should try here. 2013 V6, when I try to upload the stock tune from the PCM I get “Unknown Controllers Detected. Specify or read again” Tried to read again and got the same message. Any clue as to what I should do from here? Had the car here last night for a while and it should be here today for us to try again if we can figure this part out

---

You need to specify it is an ESYS PCM

Eric, thank you! Figured it was something simple, usually is eh?! Car is owned by a good friend of mine and we are going to spend the day on it today.

Quote:

---

Originally Posted by MMGT1

Eric, thank you! Figured it was something simple, usually is eh?! Car is owned by a good friend of mine and we are going to spend the day on it today.

---

You will need to send the read in to support so I can add the definition for it.

Ok, will do... should be here very soon and Ill send it in once I have it.

I just purchased a '14 gt. Is there a way to data log the factory wideband? I looked for the pid but I only see STFT and LTFTs.

Quote:

---

Originally Posted by 06bluchevy

I just purchased a '14 gt. Is there a way to data log the factory wideband? I looked for the pid but I only see STFT and LTFTs.

---

I will be adding that into the scanner in the next few days.

Any support for the 2010-2011 Chevy Traverse, GMC Acadia soon? I had been using the beta, but today when I went to update the 2.25 wasn't on my page anymore.

Quote:

---

Originally Posted by LEDbetter

Any support for the 2010-2011 Chevy Traverse, GMC Acadia soon? I had been using the beta, but today when I went to update the 2.25 wasn't on my page anymore.

---

Check the supported vehicles page. We updated it this week.

Thanks Eric. I see that 2009-2011s still aren't supported yet. But I was blown away when I saw how many credits it costs to license a Viper lol. 20?!

Quote:

---

Originally Posted by LEDbetter

Any support for the 2010-2011 Chevy Traverse, GMC Acadia soon? I had been using the beta, but today when I went to update the 2.25 wasn't on my page anymore.

---

Request a new 2.25 beta from support. These are supported.

Quote:

---

Originally Posted by Eric@HPTuners

I will be adding that into the scanner in the next few days.

---

:pray: Please, please, please add it today.. Pretty PLEASE! :worship:

Quote:

---

Originally Posted by Fire67

:pray: Please, please, please add it today.. Pretty PLEASE! :worship:

---

I'll see what I can do :-)

Awesome! Heading to the Dyno now.

And if its available, a pid that logs the timing changes due to knock retard/advance.

Quote:

---

Originally Posted by Fire67

And if its available, a pid that logs the timing changes due to knock retard/advance.

---

I believe you can extrapolate that by looking at knock and spark advance. Of course having the car under load on the street vs. dyno may net different results. ;)

Will the 2005 and earlier Mustangs be supported anytime soon?

TIA!!!

Quote:

---

Originally Posted by Eric@HPTuners

I'll see what I can do :-)

---

Yes knock would be great if it's not already added to the latest beta.

Quote:

---

Originally Posted by vortech

Will the 2005 and earlier Mustangs be supported anytime soon?

TIA!!!

---

2005 is currently supported. It's 2004 and earlier for Mustangs.

Quote:

---

Originally Posted by vortech

Will the 2005 and earlier Mustangs be supported anytime soon?

TIA!!!

---

Yes