Here is a 2018 Q60 SILVER Sport(300hp) base file.

Printable View

07-17-2019
Snyper

1 Attachment(s)

Here is a 2018 Q60 SILVER Sport(300hp) base file.

Here is a base file from a 2019 Q60SS.
Attachment 91619

Also here is a tip when reading/writing. I am an Infiniti master tech/service manager. Whenever we perform factory ECU updates, the fans ALWAYS turn on causing a massive power draw and these vehicles are very sensitive to voltage. What we do in the shop is remove the fans relay before doing a read/write. I noticed the fans do the same thing when doing a read of the vehicles. You will need two very small screw drivers or picks and just push down the tabs on each side and pull up on the relay and it comes out.

I will post a stock red sport 400hp stock file tomorrow once I go to work and read one.
08-04-2019
Pandion

I went to try to open this .hpt file but it gave a message "Unable to open file. You are not authorized".

Is the file locked for some reason or do I need to buy something before I can start viewing files?

I wanted to have a look at this because I am still trying to decide which tuning software I want to go with, to tune my 2018 Q50 3.0T Luxe. I have some experience with HPT on the LNF motor. But it's been years since I have last used HPT.
08-04-2019
Snyper

It's not locked.
08-09-2019
frostycrowd

I got the same message "unable to open, you are not authorized", all other files I've downloaded on this sub have opened fine.
08-10-2019
evan.s@hptuners

Quote:

Originally Posted by frostycrowd

I got the same message "unable to open, you are not authorized", all other files I've downloaded on this sub have opened fine.

You have to have an MPVI2 plugged in to open the file. All new market releases require this
08-13-2019
SultanHassanMasTuning

use latest beta
11-20-2019
pax13gt

Quote:

Originally Posted by Snyper

Here is a base file from a 2019 Q60SS.
Attachment 91619

Also here is a tip when reading/writing. I am an Infiniti master tech/service manager. Whenever we perform factory ECU updates, the fans ALWAYS turn on causing a massive power draw and these vehicles are very sensitive to voltage. What we do in the shop is remove the fans relay before doing a read/write. I noticed the fans do the same thing when doing a read of the vehicles. You will need two very small screw drivers or picks and just push down the tabs on each side and pull up on the relay and it comes out.

I will post a stock red sport 400hp stock file tomorrow once I go to work and read one.

Do you have the redsport file posted or is it in the repository?
02-07-2020
jaydubb71

Quote:

Originally Posted by Snyper

Here is a base file from a 2019 Q60SS.
Attachment 91619

Also here is a tip when reading/writing. I am an Infiniti master tech/service manager. Whenever we perform factory ECU updates, the fans ALWAYS turn on causing a massive power draw and these vehicles are very sensitive to voltage. What we do in the shop is remove the fans relay before doing a read/write. I noticed the fans do the same thing when doing a read of the vehicles. You will need two very small screw drivers or picks and just push down the tabs on each side and pull up on the relay and it comes out.

I will post a stock red sport 400hp stock file tomorrow once I go to work and read one.

Do you have that file available yet?
02-11-2020
Camaro6

I just sent in a 2019 Q60 read that gives a checksum error when opening it in vcm editor. Owner dropped it off today hoping to get it back tomorrow......

Ticket ID: 205184
Subject: 2019 Q60
Department: Support (Existing Customers)
Type: Issue
Status: Open
02-16-2020
JorgeGuerra

Quote:

Originally Posted by Snyper

Here is a base file from a 2019 Q60SS.
Attachment 91619

Also here is a tip when reading/writing. I am an Infiniti master tech/service manager. Whenever we perform factory ECU updates, the fans ALWAYS turn on causing a massive power draw and these vehicles are very sensitive to voltage. What we do in the shop is remove the fans relay before doing a read/write. I noticed the fans do the same thing when doing a read of the vehicles. You will need two very small screw drivers or picks and just push down the tabs on each side and pull up on the relay and it comes out.

I will post a stock red sport 400hp stock file tomorrow once I go to work and read one.

Any updates on that Red Sport File :)
03-25-2020
jaydubb71

Quote:

Originally Posted by Snyper

Here is a base file from a 2019 Q60SS.
Attachment 91619

Any luck on that Red Sport file? We are still waiting to see one.
03-25-2020
evan.s@hptuners

Quote:

Originally Posted by jaydubb71

Any luck on that Red Sport file? We are still waiting to see one.

Check back tomorrow, I have a ticket for one right now. If one doesn't get posted I'll post it
03-25-2020
evan.s@hptuners

Really the only thing you'll see different between the SS and RS is turbo speed related parameters (excluding table values themselves, obviously some of those are going to be different but I'm only talking about strategy). SS has them but everything is just estimated, with the RS and the addition of the turbo speed sensors all of these maps come into play
03-25-2020
jaydubb71

Quote:

Originally Posted by evan.s@hptuners

Really the only thing you'll see different between the SS and RS is turbo speed related parameters (excluding table values themselves, obviously some of those are going to be different but I'm only talking about strategy). SS has them but everything is just estimated, with the RS and the addition of the turbo speed sensors all of these maps come into play

Isnt the boost level different between the SS and RS?
03-25-2020
evan.s@hptuners

Quote:

Originally Posted by jaydubb71

Isnt the boost level different between the SS and RS?

Check what I said between the parentheses, I wasn't talking about table values
03-25-2020
jaydubb71

Quote:

Originally Posted by evan.s@hptuners

Check what I said between the parentheses, I wasn't talking about table values

Duh! My bad. Reading is fundamental. Lol!
03-26-2020
Fast4.7

Quote:

Originally Posted by Snyper

Here is a base file from a 2019 Q60SS.
Attachment 91619

Also here is a tip when reading/writing. I am an Infiniti master tech/service manager. Whenever we perform factory ECU updates, the fans ALWAYS turn on causing a massive power draw and these vehicles are very sensitive to voltage. What we do in the shop is remove the fans relay before doing a read/write. I noticed the fans do the same thing when doing a read of the vehicles. You will need two very small screw drivers or picks and just push down the tabs on each side and pull up on the relay and it comes out.

I will post a stock red sport 400hp stock file tomorrow once I go to work and read one.

I never remove the relay, but I do hookup my battery charger and put it on the 40 amp setting. Just to make sure the battery voltage does not drop for any reason during a reflash.
03-26-2020
jaydubb71

Quote:

Originally Posted by evan.s@hptuners

Check back tomorrow, I have a ticket for one right now. If one doesn't get posted I'll post it

File not posted yet. Can you post it?
03-26-2020
evan.s@hptuners

1 Attachment(s)

Quote:

Originally Posted by jaydubb71

File not posted yet. Can you post it?

Attachment 97669
03-26-2020
jaydubb71

Quote:

Originally Posted by evan.s@hptuners

Attachment 97669

Cool thanks!
03-27-2020
IARLLC

Thank you Evan. I expect that this RS file will give us a decent start on the SS tuning.