HELP - XR6 turbo-Fuel Base isnt responding commanded any clues fairly new to HP
Hi Guys
I have my custom tune very close to complete with final touches to be done to the FUEL under WOT only, my Lambda read out from and external unit showing lean actually very lean, its definitely not responding to Fuel Base table open loop table that i have set.
When logging along with (Autronic lambda unit) under half or full throttle mixtures are very lean from (.93 -.88) and I've can also confirm that open loop is active from 30 % to WOT throttle
MY Question....
is there a WOT enrichment target table that I'm not familiar?.... like the (GM Software on the LS series) as far as fuel base table numbers ive set them to .70 (lambda) just as a test from 30 % throttle to WOT throttle and no change at all.
Short term trims numbers are correcting and working with in 2% to 7% chasing what the EQ Command is set to.
Injectors are F6 FG light blue and are scaled from a stock F6FG .
Any Assistance?
i hope I making sense.