6.7 PS tuning(Diesel newbie)
Hello all, I've scowered the Diesel section for PS for any sort of beginners guide but have found nothing so far. I'm New to Diesel, Not to tuning. I'm not a shop just tune my own stuff. I Did basic stuff on my Coyote with HPT and My old Cobalt SS/SC with HPT as well. But with Diesel this is completely new. I have a 2013 F250 4x4 with 95k miles. Completely stock currently. I've done a bit of logging and inspected the Factory file. So I have familiarized my self. I'm not looking for a hand holding session. But just some basic advice. Things, Like How do I scale MAF if i go to a different intake, adjusting injection timing or injection quantity. I have the calculator spreadsheet. But I don't know the correct way of using. Like how much is too much injection timing? To me these are sorta basic things. I don't have a dyno to access either. I'm also not here looking to make max power on a stock truck. Just things to make it overall better. Any advice is greatly Appreciated. I have stock read I can throw up and long data loggin sessions. I also am unsure of what histograms I should create. I have a injection timing, VGT Position and boost pressure minus atmo setup currently. Thanks