Guys I have a e38 ecm that wont pass over 63lb/h on the injector flow. I have the data for the bigger injectors they are around 90 lbs, on the data there is the scale of 72.5% - 63.00% - 57.51% that I can use. The injectors are from Fuel injector connection and data. IF any scale works which one should I use and what other tables should I scale?
make your life easy
just do 50%
Just the airflow and the tables with x/y correct?Quote:
Originally Posted by mbray01
depends, if your just trying to get the injector data in, then the flow rate and afr trick. if your going to scale the entire tune(you are running a bunch of boost and may run out of airflow) then you have to scale everything that is labeled airflow, or references airflow. there are a ton of tables