Hey Fella's
I'm working on the following ECU hardware ID's and they are all missing any knock related PID's in the Scanner - 1EN3B, 1EN2B and 1NX6D
Have tried re polling but still no good, only way to fix this is through HP Tuners Support?
Also the 1NX6D is missing the injector minimum pulse width setting, is this unique to this ECU ID or something with HP tuners?
I have submitted a ticket for the 1NX6D ECU but still awaiting a outcome. Over a month now.
Thanks in advance.
What is your ticket numberQuote:
Originally Posted by Jchau1
Ticket ID - 7666. Note the ticket was only raised with the concern over the 1NX6D ECU but if you could also update 1EN3B & 1EN2B that would be greatly appreciated!Quote:
Originally Posted by evan.s@hptuners
Post the files for the other two, I have the file in the ticket but I'll need the others to add the PIDs
If you update to latest beta (4.9.1078 or later) and repoll for supported parameters you should see about 20 new memory parameters added to log, a good chunk of them containing knock related PIDs. Just for 1NX6D, when you post the other files I can add them as well.Quote:
Originally Posted by Jchau1
Thank you Evan! How about the Injector minimum pulse width? Will upload the other files shortly.Quote:
Originally Posted by evan.s@hptuners
Files attached Evan,
Attachment 110232Attachment 110233
It Worked Evan! Thanks a heap mate. Looking forward to seeing what other progress happens in the future!
No problem, I'll add to those other files on Tuesday. We're off Monday for the holiday.Quote:
Originally Posted by Jchau1
Awesome. Thanks Evan.Quote:
Originally Posted by evan.s@hptuners
Done on 1EN3B, download latest. The second file you sent me was another copy of the 1NX6DQuote:
Originally Posted by Jchau1
Whoops, Sorry Evan. Try this attachment.Quote:
Originally Posted by evan.s@hptuners
Thanks Mate
Any luck with this Evan?Quote:
Originally Posted by evan.s@hptuners
Yep, download latest and repoll, they're addedQuote:
Originally Posted by Jchau1