-
Need Help on PID's
I need help from the HP Tuners guru's on the Forum. I am looking at some scans from a recent on-track data log and a prior dyno run. What is the difference between the following PID's:
"Trans Engine Torque"
"Engine Torque"
"Delivered Engine Torque"
I understand these values are derived from various tuning inputs and could be quite different than actual torque measured on a dyno.
__________________
-
All the same. Can't remember which one but one of the engine ones clips at 850Nm or thereabouts.
-
And yes, very different to a dyno reading. Unless the dyno sheet is from an engine dyno.
-
Help! I am caught in a cross-fire between my car tuner and transmission builder/tuner. Can someone identify for me the correct name of all VCM Scanner PID's that relate to torque. I need to know the description of each, is the PID in the Engine or Transmission section, and how they are different.
-
Just log trans engine torque.
If you posted a dyno sheet and log that clearly shows your sympton it would likely be very easy for us to see which side needs work.
-
You need to delete both this particular tuner and this particular transmission builder from your life, they are having a dick-waving contest and this will go nowhere until you get someone competent. As I believe you were basically (though, rather more politely) told in the identical thread you started in the transmission section.