New to TrackAddicts and RaceRender! I managed to successfully overlay my data recording from my phone on top of Garmin catalyst data video using RaceRender.
Yesterday I was at a lapping day at Mosport, I decided I wanted to pull/record a couple more inputs via Bluetooth for the day.
Upon getting home and trying to combine the catalyst vid with TA data, it seemed like it skips a bit. Throttle, RPM, and speed are jumping.
Being new, I tried to search and find as much info as I could. Upon looking at the CSV log, I have found some spots where RPM will go from say 4600 to 5700 in one line. What I noticed is where this happened, "OBD_Update" shows 1 as value.
After searching, the only thing I found was there may have been too many channels selected. From my previous track day where everything worked fine to yesterday, I think I tried to log 2-3 extra channels.
Is this likely the culprit? I need to reduce the number of channels being recorded? I've attached a snip as an example: Column 1 = OBD_Update, Column 2 = Eng RPM, Column 3 = Speed
I am using a VEEPEAK OBDCheck BLE OBD2 Bluetooth Scanner FWIW.
Thanks!
Attachment 124454