Unknown: 00 3E correction

Truck I am tuning keeps throwing this unknown master fuel correction. and its not achieving the timing I am demanding.. I have tuned a few trucks now and I havent came across this before

Any help is appreciated! Thanks

Attachment 116941
Attachment 116942

Not sure on that one as the state mapping stops a 003D

Quote:

---

Originally Posted by Jim P

Not sure on that one as the state mapping stops a 003D

---

I compared it with another 04.5 I tuned, The only difference I could find was the estimated airflow tables. On the one with no issues the tables were stock, and on current tune with the unknown correction I maxed it out

When I look at the fuel state mapping it doesn?t show anything beyond state 3D which is low fuel pressure derate, so I can?t even say what 3E is, it doesn?t appear at all in the Cummins stuff. 3E doesn?t appear in any of the systems possible states.

Have you tried flipping the part throttle Gov switch to disable?

Quote:

---

Originally Posted by JaegerWrenching

Have you tried flipping the part throttle Gov switch to disable?

---

The only time it throws the correction is when its full throttle

The log shows me your throttle is at 87.6% when the limiter kicks in and you only hit a max of 94.3%. You have the part throttle stuff maxed out anyways might as well hit the switch and see if it helps, i'd also check to make sure you can achieve 100% throttle and make sure nor carpet or floor mat is in the way.

Quote:

---

Originally Posted by NRunkle

The only time it throws the correction is when its full throttle

---

Quote:

---

Originally Posted by JaegerWrenching

The log shows me your throttle is at 87.6% when the limiter kicks in and you only hit a max of 94.3%. You have the part throttle stuff maxed out anyways might as well hit the switch and see if it helps, i'd also check to make sure you can achieve 100% throttle and make sure nor carpet or floor mat is in the way.

---

Oh, good catch! ill check that out