Camaro LFX Single turbo tune

Hi to all, I'm running an custom LFX single turbo setup with MAF only tune,
The maf only is because I'm from Peru and nobody there tune or know how to tune that kind of engines ... they prefer jdm engines :banghead:... and thanks to the help of ed @erm, courses, posts, guides, and after review tunes of similar FI setups (lf4,lf3) I achieve an stable LFX with 8psi...

But, would like to know if someone there could share an LFX FI tune... to review that and try to improve my knowledge.

Im going to share my tune If someone would like to review and give me some feedback...
Attachment 84688

hey man have you made any progress on this im in the process of tuning my Twin Turbo not sure if you have updated your tune since

Quote:

---

Originally Posted by tlavoie87

hey man have you made any progress on this im in the process of tuning my Twin Turbo not sure if you have updated your tune since

---

Attachment 86184

My TPS don't open 100% and see some KR

Attachment 86186

How much boost and which AFR are u ?

14-15 psi .. .83 Lambda also spraying meth i got a set ove mace cams with an overdrive Fuel lobe on the Way now

Quote:

---

Originally Posted by jquequezana

Attachment 86184

My TPS don't open 100% and see some KR

Attachment 86186

---

Your throttle does open 100%. It's just HPT needs some calibration to read it properly.
https://forum.hptuners.com/showthrea...2069#post32069

jquequezana how is your idle.. i cant seem to get rid of negative timing i have tried just about everything

tlavoie. Look for small vac leaks.

Quote:

---

Originally Posted by 2jzgte

tlavoie. Look for small vac leaks.

---

will try i did some Maf and VVE tuning and got it to idle around 0-4 degrees which is decent was better than the -5--10 degrees

Quote:

---

Originally Posted by tlavoie87

14-15 psi .. .83 Lambda also spraying meth i got a set ove mace cams with an overdrive Fuel lobe on the Way now

---

Share u tune bro would like see how your timing table is set

Are u fix the barometric correction ? doing a baro breakout ?

Hey jquequezana what kina map sensor are you using?? I have a 2015 3.6l camaro with single turbo set up and the stock map sensor only gose to 17.4 psi max

im using a 3bar but run maf only

Quote:

---

Originally Posted by jquequezana

Share u tune bro would like see how your timing table is set

---

send me a PM

ZR1 3bar map sensor