2007 Wrangler with 2003 LM7 / 4L60e

Hello,

I just finished installing the engine and trans, got all my wires hooked up, engine runs etc.

The Jeep PCM runs the gauges etc, with eop, ect and ckp sensors, i tried shutting down all the mill triggers but i still have the TB light on.

Any way to turn this off?

Currently what you need to do it is not mapped out in the software, I know they are working on it!
Hope this helps
AJ

Quote:

---

Originally Posted by Bertus76

Hello,

I just finished installing the engine and trans, got all my wires hooked up, engine runs etc.

The Jeep PCM runs the gauges etc, with eop, ect and ckp sensors, i tried shutting down all the mill triggers but i still have the TB light on.

Any way to turn this off?

---

Hey bud don't want to jack your thread but maybe you could help me? I just finished a ls2 in my 07 wrangler. I lost my speedo and fuel gauge. I did my harness for the jeep side with only crank, oil, temp, trans range, tcase range,alt and ac. Did you have anything else hooked up? Thx

Also if you still have your throttle light on I might be able to help. Pm me