1 Attachment(s)
07 Grand Cherokee scanner issues
Have on 07 SRT Grand Cherokee. The scanner is not working correctly. The knock sensors voltages are stuck. Knock retard is stuck at 1.5 and Injector data is not moving either. Ckd with snap on scanner Verus and it reads correctly. 4.06 scanner. Thanks!!
2 Attachment(s)
Stuck at half throttle after full throttle test
Bump to this post and scary ride. Back to messing with this 07 Grand Cherokee from Hell. Downloaded the latest beta and still the Scanner is still not working correctly. Made a wide open run on the street to see if the new Transmission was doing what we wanted it to. Let off the throttle and the vehicle kept ACCELERATING!!For 2 seconds it Closed the throttle to 43% immediately and then finally closed the throttle. At 43 % throttle it was still accelerating. Unfortunately The accelerator pedal pid voltage is not working Also injector pulse-width does read correctly. Knock retard does now read but knock sensor voltages do not. I was working with the transmission, thus why I was using HP tuners. The (D) guys logging for engine seems to work correctly. Not sure why it held at half throttle. Its at 12:57 into the log if someone would care to look and give input. Thanks!!