Printable View
OK trying to get my AEM 30-0310x to work on HP Tuners Standard using CAN data.
I know the WB is working as the analog output is sent to a Aeroforce gauge.
I'm using the lastest HPT 3.6.26 after Repoll for supported Parameters is should show up as WB EQ Ratio 1 (According to AEM) and it is not.
I've double checked my CAN high and Low connection are correct. Any thoughts?
This not going to work. AEM has a 30-0333 or 334 that provides a CAN signal that HPT can read directly. Otherwise you will need custom code on them. I have two in my ZL1. Dr. Mike and this thread. https://www.hptuners.com/forum/showt...d-beta-testers
Thanks for the info! I ordered and installed the wrong model. AEM 30-0333 on order now.
The 30-0333 is the older version. My understanding it is getting replaced by 30-0334. I will tell you the custom code on the 30-0310 works very well. Have it running now for a over a year.
Ordered 30-0334. Where do you get the custom code for the 0310?Quote:
Originally Posted by jsllc
AEM hasn't decided to add the OBDII code to the 30-0310 because it lacks any sort of user interface to set up. So, the settings have to be hard-coded in the firmware.
I have done a few re-flashes of the firmware for some customers with fixed-settings firmware. But, if you don't know which settings ( on a 30-0333/334 ) work for you, it's a crap shoot.
Thanks for the added information dr.mike