Printable View
2016 Camaro SS Procharged M6
Does anyone have an answer as to why I am limited to 5,000 RPM in gear(M6) and not moving? Im trying to launch on slicks and no matter how much throttle i give, it seems to always close the throttle and hold it at 5,000 even if it initially goes above 5k. Traction control and stabilitrak are both off and i am not using the launch control either.
Attachment 91530
Here is log of it happening also. Any help/guidance is appreciated.
Attachment 91568
Raise the switchover delay to 409 in neutral. Then you can play with the commanded torque table for neutral in the higher rpm cells. It will still try to limit only it will just pull timing. You can adjust how much timing it will pull in the commanded torque table. I just have mine set on my 1LE at -3000 at 7200 rpm, the rest stock. Launching at 6500. Just be careful as this is taking away the fuel cut and throttle pull. Easy to over rev.