Standalone logging not working on MPVI Pro

Printable View

05-30-2019
Hoosier Tuner

Standalone logging not working on MPVI Pro

I upgraded the MPVI Pro that had all of my licenses to an MPVI 2. I've got another MPVI Pro that I want to do standalone logging with until that is available on the new interfaces, but this MPVI Pro isn't doing it. I did the Write Config for my 03 Avalanche, hit the Record button on the unit while the truck was on, green red came on, hit the stop button after a bit, waited for the busy light to go off, then when trying to read the log when I hit Get Info it doesn't show a log. Interface logs when computer is hooked up. Help!!!
05-31-2019
Bill@HPTuners

Standalone datalogging is not enabled on MPVI2 yet.
05-31-2019
Hoosier Tuner

Quote:

Originally Posted by Bill@HPTuners

Standalone datalogging is not enabled on MPVI2 yet.

Exactly. That's why I was trying to use an MPVI, not my MPVI 2, to do standalone datalogging.
05-31-2019
Bill@HPTuners

Try standalone datalogging just engine RPM in the configuration to see if that at least works.
05-31-2019
Hoosier Tuner

It works with just rpm. Guess I've got to trim what I wanted to log to get it to work.
05-31-2019
Hoosier Tuner

Had to eliminate several parameters, but able to log 36.
06-03-2019
Bill@HPTuners

Quote:

Originally Posted by Hoosier Tuner

Had to eliminate several parameters, but able to log 36.

yeah thats alot of pids for a 20 year old ecm, try staying around 20-24, I believe the framerates are much better.