Aeroforce gauge wideband to mpvi 2 pro
Hey guys i've got a 09 cts-v I installed a aeroforce gauge and wideband, now am trying to install it with my pro to log what my A/F is at. So i have the blue (analog 2) connected to the black wire on the aeroforce box which is what they tell you to connect for data logging. I have everything into hp tuners and it is showing up but getting a reading of 10-12.5 or so. i think my input numbers are wrong but there is nothing in aeroforces guide other than 2-10 and i have that in and not getting the right reading. Do i need to connect more wires from the pro? Does anyone know the input numbers needed? any help is appreciated!
So just hook up the brown to the red and black wire to black wire?
Quote:
Originally Posted by
whistler777
Brown - Wide band analog output 0-5v (0v = 10 AFR, 5V = 20 AFR). This wire
will connect to the Interceptor analog input (see gauge instructions) or other data
logging device. this is the wire you need. the black wire appears to be an extra ground to eliminate ground offset errors