Are the MPVI and/or MPVI2 Interfaces ELM327 Compatible

Are the Interfaces ELM327 Compatible? Just curious. Thanks

Not exactly sure what that means to be perfectly honest. I will say our software is proprietary and will only work with OUR hardware. It will not work with any other hardware on the market.

BCM editing has been surfacing for a while and the one I use needs an ELM327 Compatible interface. It would be nice if one who had HPT didn't need to purchase another interface.

I imagine or dream if the market were attractive enough HPT would expand into it. A tuner shop could offer more services such as making the vehicle LED compatible (no resistors needed), DRL's on in park, Fogs on with high beam, to name a few of a vast possibility list.

Quote:

---

Originally Posted by 2therock

BCM editing has been surfacing for a while and the one I use needs an ELM327 Compatible interface. It would be nice if one who had HPT didn't need to purchase another interface.

I imagine or dream if the market were attractive enough HPT would expand into it. A tuner shop could offer more services such as making the vehicle LED compatible (no resistors needed), DRL's on in park, Fogs on with high beam, to name a few of a vast possibility list.

---

It would be nice

Sorry, we have no plans to make our software open source nor have our hardware be open source.