Printable View
Is anyone else experiencing issues where the RPM readout will freeze for a few seconds during logging then come back online?
I have just notcied this since starting to use the Pro-Link input rather than hooking up my wideband to serial port on the laptop, if so any workaround to help speed it up? Such as sample rate etc
I am logging 25 PIDs currently which I know is nearing the max but this hasn't changed since moving from serial to the link
No takers on this?
As an update I hit 5000rpm on a few shifts today yet VCM had frozen out the RPM at 2400 max.......so lost all that data! Which is shit
I have since ordered another serial port connector to solder to the AEM 30-0300 and log via USB C, will see if this fixes it. Unsure if it is a glitch with the beta software or a new thing that should be noted when trying to log a gen 3 using pro link ?
For anyone interested, swapped back to serial today after making a new cable and the problem is gone. RPM reads perfectly all through logging
send this to support, they will look into it that way.Quote:
Originally Posted by South Lakes Speed Shop