-
Maf Tuning
Working on 2019 CAMARO when making changes to the maf table while monitoring the maf vrs ltft table in scanner and then writing the changes by multiplying by % it dosnt seem to actually be making the changes anyone have same problem or kn w of something that needs to happen with the 2019's ?????
-
Did you make sure that the column labels from your error graph matches that of the MAF table?
-
Make sure you highlight the entire table in the scanner, it should turn blue. Then copy. Next go to the editor highlight the entire table there, then multiply by%.
-
Long shot here:
Also make sure your scanner is setup so it shows 1 for 1%, not 0.01. Another example- 3.5% should show as 3.5 in the scanner, not 0.035.