1 Attachment(s)
Scanner Configuration & Histogram Repository
Aight guys as many of you have already noticed LS1's are the default when it comes to the config files & histograms for the most part. Here you can post what configs have helped you along. Include in your post with this format:
Year
Make
Model
OS
Vin
What the config is for? Idle tuning, SD tuning, MAF tuning, General
If your post is missing anyone of those it will likely be deleted since I need that info to verify its a working configuration.
If you have custom histograms you'd like to post as well feel free. Same info is needed.
NOTE: Do not open the .cfg or .hst files with anything but the scanner.
The .cfg (configuration files) go in your:
C:\Program Files\HP Tuners\VCMSuite2 Directory
The .hst (histogram files) go in your:
C:\Program Files\HP Tuners\VCMSuite2\Histograms Directory
Here's an example
2001
Chevy
Camaro
12202088
2G1FP22G412102986
MAF Tuning/VE Tuning
I5 Configs & histograms
http://www.hptuners.com/forum/showpo...9&postcount=57
http://www.hptuners.com/forum/showpo...0&postcount=58
Thanks to NightriderCobaltSS from CSS.net for his help developing these two configs which will hopefully be included in one of the upcoming installer packages if all goes well
They should work well for all 04-06 Cobalt SS's
This can be used on most 4cyl e67 pcm'd equipped vehicles.
This config was done by BennyHHR & im just posting it for him.
To avoid any confusion these are NOT tunes, these are scanner config & histograms to be used in our scanner.
LNF Boost Histograms and Custom PID
2008
Chevy
HHR SS Auto
PCM 12625310
TCM 24243902
3GNCA63X88Sxxxxxx
Monitoring Boost
More LNF histograms, a config file for monitoring boost and a custom PID.
The following custom PID is required for the attached histograms with 'Cst PID' in the title. The other histograms use the factory boost sensor PID.
This PID uses MAP sensor pressure as the engine pressure reference and subtracts atmospheric pressure.
Code:
Convert MAP to Boost Pressure -
Formula: (MAP Sensor - BARO) / 6.894757
Name: Boost
Abbrv: Bst
Sensor: none selected
Units: psi
Function: ([SENS.30.MET] - [PID.2340.MET]) / 6.894757
This PID uses the factory boost sensor as the engine pressure reference and subtracts atmospheric pressure.
Code:
Boost Pressure (psig) -
Formula: (Boost Sensor - BARO) / 6.894757
Name: Boost
Abbrv: Bst
Sensor: none selected
Units: psi
Function: ([PID.2336.MET] - [PID.2340.MET]) / 6.894757
NOTE: Do not open the .cfg or .hst files with anything but the scanner.
For version 2.22 and later, file locations are as follows:
The .cfg (configuration files) go in your:
C:\Documents and Settings\<USER NAME>\My Documents\HP Tuners\VCM Scanner\Configs
The .hst (histogram files) go in your:
C:\Documents and Settings\<USER NAME>\My Documents\HP Tuners\VCM Scanner\Histograms