Can I adapt an Auto tap usb cable to work with the LS1-edit software?
Thank you
Robert
Printable View
Can I adapt an Auto tap usb cable to work with the LS1-edit software?
Thank you
Robert
NO!
first that would be trying to steal from the people of carputing..
2nd the atap hardware doesn't have enough memory to do a decent transfer or the transfer requested by the ls1edit cable
3rd the ls1edit software will authenticate with its cable so no can do.
Sorry did not think of it that way. I have a ATAP cable and was looking into the LS1 software thought I could get it to work seeing how I OWN the cable. I will just purchase the cable and software Thank you
Robert
Be patient.. do not waste your $... good things are to come very very cheap where you will OWN everything.
I am being patient. Its just I have the cable and have been reading this WHOLE forum and seemed like I could finagle a bagle to get his to work seeing how I OWN the cable not AUTOTAP they just own the design right? Or am I wrong in this train of thought?
Non the less I WILL be purchasing the FULL version once one of the creators gets in touch with me to discuss some things. ;D
Thanks for the info
Robert
a full version for all cars can run you around 35k!
OUCH!!!!
A full package for v8 will runyou 7k or so... not easy though.. 1k less than carputing.. but its still not that much easier.