Bench harness?

Anybody want to share plans for an NGC bench flash harness?

How about GPEC?

How about where does the resistor go?

https://www.lxforums.com/board/gener...g-harness.html

https://forum.hptuners.com/showthrea...7-Hemi-pin-out

https://www.forabodiesonly.com/mopar...p-info.302755/

http://www.cuda-challenger.com/cc/in...opic=103121.75

https://www.youtube.com/watch?v=RB0fTopwBsQ

https://www.te.com/commerce/Document...%7F9-1326729-8

Attachment 102871

The 120ohm terminating resistor may not be used on all applications. Specifically some of the early stuff like PT & SRT4. YMMV. Try it the other way if it doesn't work.

Ok, lets try for a GPEC harness.

Found this:

https://www.te.com/global-en/product...alse&instock=N

And:

Quote:

---

Originally Posted by Homer

I believe only cavity C1 is used.

Pins are:

23 - 12V
75 - 12V
96 - 12V

33 - Can L
57 - Can H

72 - GND

---

https://bench-force.com/collections/..._make=Chrysler

Not trying to ressurect a dead thread but I figured I'd put the information out there. I made a bench harness last week. I documented all of it here: https://www.hellcatforum.org/threads...trollers.9475/

Thanks. There's not much out there for us Mopar guys, any additions are welcome.

I also have a facebook group for Mopar HP Tuners that now has quite a few members. I have more bench harness info there in "FILES" at the top of the group.

Here is a link to the group:

https://www.facebook.com/groups/450134375944901

Quote:

---

Originally Posted by spoolboy

Thanks. There's not much out there for us Mopar guys, any additions are welcome.I also have a facebook group for Mopar HP Tuners that now has quite a few members. I have more bench harness info there in "FILES" at the top of the group.Here is a link to the group:https://www.facebook.com/groups/450134375944901

---

Unfortunately I don't do FB, sorry. If you would like to post the information up on the FB group that's fine with me.