2 Attachment(s)
Time delta bar & other newbie questions
Hi all,
I purchased RaceRender ultimate last weekend to make some gauges for my telemetry. So far really loving the product!
I made a time delta bar from using the this lap vs cur best lap field. I couldn't find a delta bar that came out-of-the-box (please correct me if I'm wrong) so I made two bar graphs with indexes of 0 - -3 and -3 - 0 respectively and coloured them red and green, and then stuck the bars end-to-end. You can see the result here: Attachment 89785
This seems to work pretty well but there are a few problems. The first one is that each box seems to show a single pixel line of the fill colour when the reading is at 0 and they should be showing nothing at all. The second problem is that in order to get the bars to line up perfectly back-to-back in the rendered video, I have to actually set them to overlap slightly in the editor. You can see both of those things here: Attachment 89786
Any thoughts on this?
Lastly I've noticed that I can't adjust the width setting of a bar graph without also affecting the height, even if I disable the setting to maintain aspect ratio. And it seems like thickness (which I've been using to reduce the height, since the actual height setting is greyed out) can be adjusted without affecting the width of the bar. Thus, if I want to reduce the width but maintain the height I have to play around with these two settings which is a bit cumbersome. Please let me know if there is a better way to do this.
Cheers!