Printable View
Hi All, went for a few runs this morning, but not getting any useful information back as all 0s in the charts for STFT +LTFT , can someone check I've set it alright or is it a case of taking time to switch back on after a reset/tune addition, many thanks John
Been out again, read somewhere to repopulate the PIDs using the scanner, tried that no luck, alternator is giving me grief too now :(
Your closed loop enable coolant temp vs IAT is maxed ....set it to 130*F / 55*C...ish , should get the trims active
Thanks for that, something I missed, waiting on alty to come from USA