need some answers plz someone

I'm not using a hp tuner and wish I was but I didn't know about it at the time I bought my first tuner. I'm running a L31 350 with a built tranny and rebuilt rear end with 373 gears under a 99 chevy burb. I'm using the jet dst tuner and know its got some different named tables but its basically the same. I want to know if the setting under fuel parameters labeled power enrichment rate period should be set higher than factory 0.00 sec, i'm going to try and post a pic of what i'm looking at on my screen. have some other answers needed as well. thanks in advance, Neil.Attachment 88169Attachment 88169

didn't mean to post the pic more than once lol oops ins claims for sale, cost 1.295 lol

Looking at that vehicle with Tunercat, same as Jet,

Stock setting is 0.05

PE Enable TPS Threshold Hysteresis should be 5.1%, not 0

ok thank you, is this both stock settings that your telling me?

I have talked to the people at tuner cats and got to get a stock file to start over with that's why i ask if the settings your telling is stock

Quote:

---

Originally Posted by 2xLS1

Looking at that vehicle with Tunercat, same as Jet,

Stock setting is 0.05

PE Enable TPS Threshold Hysteresis should be 5.1%, not 0

---

.....

Post your vin # and I'll get you a stock file.

Ok cool, soon as I get done with my coffe I'll go outside and get it.thank you big, you saved me 40 bucks to get from tuner cats

Time*

okey dokey my vin is 1GNEC16R2XJ557285. just curious but were do you get the stock files from?

I could tell you but then I'd have to kill you. I need an email address to send it to. You can PM it to me. There has been one update from GM since the vehicle was new to eliminate false P1404 codes. The file will have that update and will be in .jcl format.

Srs, I do this professionally and have multiple tuning platforms and an extensive library of read vehicles. I can look up from GM what modules are correct for a particular VIN and build any file from that information.

Cool, I'll send my email. Thank you for your help. How do I get it to .Cal file ?

.jcl is DST format. .cal is Tunercat.

did you get my email address?