Stock 1 bar
kPa +-%Error
15 2.4
40 1.5
94 1.5
102 1.7
Delphi 2bar
kPa +-%Error
20 4.2
40 2.4
160 2.4
200 3.2
Delphi 3bar
kPa +-%Error
40 8.0
71 4.7
240 4.7
301 8.0
Thanks to OnFire on LS1tech.com for digging up this info.
Printable View
Stock 1 bar
kPa +-%Error
15 2.4
40 1.5
94 1.5
102 1.7
Delphi 2bar
kPa +-%Error
20 4.2
40 2.4
160 2.4
200 3.2
Delphi 3bar
kPa +-%Error
40 8.0
71 4.7
240 4.7
301 8.0
Thanks to OnFire on LS1tech.com for digging up this info.
Lots of data here
Great link Doug lots of useful info :cheers:
My pleasure. Used to get parts from them when I was at the "Big E".
if you look at pn12223861 thats where that 3 bar info came from... :D
Lots of digging to find a 14 year old thread.
Is it possible to use an AEM 3.5 bar map sensor if I scale it in? Im not planning on using it above 25psi but need the ease of using an npt sensor in my manifold. My plan was just to wire it in the stock harness.