Need some help with this tune

Hey guys I've installed a GPI SS3 VVT cam in my 2013 Camaro SS with Circle D's 4C converter. I keep getting a P0011 code about intake cam is too advanced. Can anyone help me out with this tune, I know the parts were installed correctly and everything timed correctly.

Mods:
Cold Air Intake by Cold Air Inductions w/air scoop and washer bottle relocation
Vmax ported throttle body
RX catch can
Pfadt 1 7/8" tri-y long tube headers
cat delete
Stainless works retro chambered 3" catback
3.91 rear end upgrade
GPI's SS3 VVT cam

Cam specs:
228/246 in/ex duration
.647/.637 in/ex lift
112 LSA
+6 ICL

any and all help would be greatly appreciated. I will also attach the current tune on the car

Thank you for your time,
Mike

Are you logging Intake Desired Camshaft angle vs Intake Camshaft angle?

yes, I'm logging both and they are pretty much the same. Here is an updated tune and log file from yesterday

set P0010 and P0011 to no error reported. This is how GPI set mine.
You wouldnt happen to have your cam card still would you? I have same cam as you. My wife tossed mine out and im needing .006 duration specs.