MPVI2 - Interface will not connect to vcm editor but will connect to scanner

The other night I was trying to load a tune and it wouldn't connect to editor. Also wouldn't connect to scanner. I resynced both and the scanner is working fine but editor still will not connect to interface. If you try and read vehicle or anything now it just says interface not connecting or something like that.

I sent in a ticket a few nights ago but haven't heard back from them yet so I figured I'd ask here to see if anyone has any tips or tricks.
thanks
02 silverado. 4.8. mpvi2 cammed and stalled etc

Did you get this issue resolved? i'm having the same exact issue.

If you have the scanner and editor open, make sure your disconnected in the scanner.