Printable View
Hello and big thanks to the devs on the constant updates. I just had a quick question to see if you had support comming for the can am outlander 570 series in the future? I see the 850/1000 is supported but it won?t read the 650/570?s. I have 4 of these machines and really just want to see if it?s worth holding out for an update or having to get one of the standalone POS?s for upgrades.
What years do you have?Quote:
Originally Posted by deadzerbo
All 2021
Those should have the old ecu, not the Bosch that's currently supported.Quote:
Originally Posted by deadzerbo
2022 have the new ecu, and drive by wire throttle, that is supported
Good to know. So I guess the question is will there be upcoming support for the pre-22?s with the other/older ecm that is currently unsupported
After a quick recheck, I can confirm they are all actually 2022?s and are still cable throttled. Build dates of 05/22
If they are cable throttle, they have the old ecu, and are not currently supported.Quote:
Originally Posted by deadzerbo
I have a 2022 570 here now, new ecu, and it's not supported currently, but I'm working with them on that
yes it seem that the me17.8.5 from the 570 will not even read. i use flex to read and write these ecu, i just tried one on the bench and it fails to detect the ecu
What is flex?Quote:
Originally Posted by East Coast Tuning LTD
magic motor sport makes flex. sorry for such a late reply I rarely use this form site, they make a master and slave tool that dose obd2 bench and boot