08 Mustang Spanish Oak won't show datalog channels

So I've been trying to log this vehicle, connected to ecm, selected channels to log, but when logging, it doesn't show the channels. Only shows a couple channels like, Water temp, Intake temp, Commanded Lambda, and Throttle pos. I've tried resetting , reconnecting. Haven't had this problem with Coyote Mustangs, Dodge Challengers, any Gm vehicle. Has anybody had this issue? The engine/trans combo is in a swapped vehicle, early 50's Ford Pu.

Ok, I cleared all channels in the config, and started with no channels, and selected them again, and every single channel started working in the logger. Weird, not sure why this was happening, but it works now.