Scanner Parameters MED17

I have a 2011 Audi A4 2.0TQ6MT and I am looking to have a few scanner parameters added which would be very useful for tuning, I know I?m not the only one looking for these to be added and I would like to use HP Tuners as my primary program for MED17 tuning in all respects

I would also like to use this thread as a start for other people to chime in with other params they would like to see available

Avg. or Ind. Cyl Ignition Retard (*KW)
Requested load (%)
Boost pressure actual (mBar or Kpa)
Boost pressure Request (mBar or Kpa)
Intake camshaft angle (*KW)
Exhaust cam lift position
Calculated EGT model (*C)
Wastegate Duty Cycle (%)
Fuel injector on time (Ms)
HPFP requested pressure (Bar)
LPFP duty cycle (%)


Thanks, Happy tuning 🙂

this are the main ones :)

vagcom.use vcds

I have VAG-com but I was looking to not switch cables while tuning/logging ��

would like to bump. vcm scanner is way easier to use than vagcom, just wish it had more pids available...

2011 gti 2.0 with a k04. just logging it for now.

VCDS can be used to log the VW and AUDI, all datas for u

Stop suggesting using VCDS it has too many caps and too slow of a polling rate to be an effective tuning tool at this point, it is for stock car diagnostics only really

And VCDS has a horrible & cumbersome user interface, especially when it comes to logging!

@TylerJDubbs, you can't log per-cylinder retard? Those values are available for my car (2012 with CAEB engine)... I wonder what the difference is?

Can someone at HP please get on this? ive been waiting far too long and still need the following...

Boost pressure actual (Without 2.56Bar logging limit "Throttle Inlet Pressure Actual" has)
Boost pressure Request
Exhaust cam lift position
Wastegate Duty Cycle
Fuel injector on time (Ms)
HPFP/Rail requested pressure
LPFP duty cycle
LPFP Actual Pressure
Drivers requested torque
MAF Frequency

Quote:

---

Originally Posted by TylerJDubbs

Can someone at HP please get on this? ive been waiting far too long and still need the following...

Boost pressure actual (Without 2.56Bar logging limit "Throttle Inlet Pressure Actual" has)
Boost pressure Request
Exhaust cam lift position
Wastegate Duty Cycle
Fuel injector on time (Ms)
HPFP/Rail requested pressure
LPFP duty cycle
LPFP Actual Pressure
Drivers requested torque
MAF Frequency

---

Not trying to be a jerk, but did you open a support ticket? Support looks at the forums, but it seems like the developers are on and off sporadically.

I’m on my 4th ticket as of this morning since I made this original post

Quote:

---

Originally Posted by TylerJDubbs

I?m on my 4th ticket as of this morning since I made this original post

---

Damn, well hopefully someone sees this and they get those parameters added.

i have made two tickets also

I have also opened a ticket for these and calculated air flow I believe.

/Alex