B8 2.0T Exhaust Cam Control

Anybody know if there is a way to modify the exhaust cam valve lift solenoids set point RPM?

I've attached pic of the intake cam control for the variable timing of the cam gear, but I can't see anything related to the exhaust cam.

Thanks!

Attachment 127227

Attachment 127228

I could try and find it in UDP but I haven't seen it defined in HPT yet

Thanks Tyler

Quote:

---

Originally Posted by DylanC

Thanks Tyler

---

Do you have UDP?

I don't. Am I crazy or do I feel it at 3200'ish rpm?

The magic is in the control valve in the end of the intake cam shaft and the VVT mechanism

mapquest directions

Quote:

---

Originally Posted by katyswift468

The magic is in the control valve in the end of the intake cam shaft and the VVT mechanism

mapquest directions

---

Hard say unless the exhaust cam lift timing point can be adjusted to see. The intake cam vvt is nice to have tho I agree! :)

Quote:

---

Originally Posted by DylanC

Hard say unless the exhaust cam lift timing point can be adjusted to see. The intake cam vvt is nice to have tho I agree! :)

---

Look what i found digging for 2.0 tfsi stuff. https://www.youtube.com/watch?v=gWrrS4FoAQI .. large and low lift . but software says intake cam angle etc? i can physically see the lift solenoids on the exhaust side of the block. but i dont think i see those parameters on my file.

thank you b