thank you, thank you!
Printable View
Don't know what this is, but since a better tune is on my 2018 Coyote 5.0 Gen3 (crate engine in kit car)- no more rumble down the gears. Turning on burble doesn't do anything.
Does anyone know what's going on?
I have tried this setting on M6 (no sport mod) but it dose not work. any help/guide...
It was only working for me in sport mode. A few months ago I did a repull from the car and reflashed the same tune and it started working in all modes. Not sure why, but it's working perfectly.
Josh
I?m new here. I?ve mastered this burble mode. Does it consistently, on command, period. If anyone?s having trouble, I can figure out how to put a file up on here.
Sub’d
My car went to the dealer a few months ago for airbag work. They updated the PCM and the burble stopped working. Interested in your file if it's available.
I've got it working, sort of, without the burble logic by lowering the lower torque ratio clips on decel allowing more spark retard without messing with mapped points. Still figuring out one or two things.
i know the GT500s have an OS mod to allow burble in all modes. Not sure if it is available for standard GT cars.
Has anyone gotten the burble mode working on 18+ Whipple OS? It exists in the calibration, but setting it up similarly to how it worked prior to the supercharger install produces nothing. For some reason it does not appear to allow the torque ratio commanded in the burble mode tables.
how Lucky!! you guys have a dedicated burble option.. we (the poor guys runnin Gen 2 coyotes) have to do it manually and pray it does not f*** up the performance of the car T_T