Dodge/Chrysler/Jeep VCM Suite 3.0+ Vehicle Supported List

We are often asked what Dodge/Chrysler/Jeep models/years are currently supported in VCM Suite 3.0+ so I decided to create this thread to keep everyone updated.

HP Tuners is pleased to have support for NGC3 based 2004-2006, NGC4 Based 2007-2010, NGC4A based 2011-2013, GPEC2 based 2011-2016, 29Bit GPEC2 based 2013-2016, and GPEC2A based 2014-2017 Dodge, Jeep, Chrysler & RAM applications.

This includes but is not limited to:

2012-2016 Chrysler 200 3.6L
05-16* Chrysler 300/300C (all trims including SRT8)
07-09 Chrysler Aspen
05-07 Chrysler PT Cruiser GT (2.4L turbo)
05-06 Chrysler Pacifica
04-10 Chrysler Sebring
05-16* Chrysler Town & Country
08-14 Dodge Avenger
07-10 Dodge Caliber
08-09 Dodge Caliber SRT4
05-16* Dodge Caravan
17* Chrysler Pacifica
08-17* Dodge Challenger (all trims including SRT8)
15-17* Dodge Challenger Hellcat
06-17* Dodge Charger (all trims including SRT8)
15-17* Dodge Charger Hellcat
04-11 Dodge Dakota
13-14 Dodge Dart (2.0L ONLY)
04-17 Dodge Durango
09-14 Dodge Journey
05-08 Dodge Magnum (all trims including SRT8)
07-12 Dodge Nitro
04-05 Dodge Neon SRT4
04-10 Dodge Ram 1500/2500 (Gas)
11-17* RAM 1500/2500/3500 (Gas)
14 RAM 3500 Promaster 3.6L
03-10 Dodge Ram 2500/3500 5.9L/6.7L (Diesel)
11-12 RAM 2500/3500 6.7L (Diesel)
2014 Jeep Cherokee (3.2L)
06-10 Jeep Commander
07-10 Jeep Compass
07-13 Jeep Patriot
05-17* Jeep Grand Cherokee (all trims including SRT8)
05-13 Jeep Liberty
05-17* Jeep Wrangler

*Note: 2015-2017 vehicles need to have their PCMs unlocked via the PCM Modification Service before tuning.

We also have support for the Gen 4 and Gen 5 Dodge Viper. Please see: Dodge Viper GEN IV and GEN V Thread regarding Dodge Viper support.

If you are unsure whether your vehicle is supported, please email support with a VIN and we can check for you.

Thanks!

Attachment 47781 Attachment 48576Attachment 48892Attachment 49534

For a complete list of supported vehicles see: HP Tuners.com Supported Vehicle List

If you want to know what PCM is in your supported vehicle see: PCM Identification Thread

YEAh !

Please update the page : http://www.hptuners.com/products/vcmsuite_vehicles.php

Is it possible to have an up-to-date excel file with all models supported ? (joined with the beta setup for example).

Can you post several tune file in the repository ?

JTEC!!! JTEC!!! JTEC!!! Please tell me its next......

Quote:

---

Originally Posted by Brice

YEAh !

Please update the page : http://www.hptuners.com/products/vcmsuite_vehicles.php

Is it possible to have an up-to-date excel file with all models supported ? (joined with the beta setup for example).

Can you post several tune file in the repository ?

---

I will update as time allows, NGC4, NGC4A & GPEC2 support wasn't added until recently so I haven't had a chance to add the info to that page.

Quote:

---

Originally Posted by joefus25

JTEC!!! JTEC!!! JTEC!!! Please tell me its next......

---

2013+ GPEC2 will likely come before jtec

Can we do anything with the 2013+ Challengers and Chargers yet?

Hello. I would please like to state first that I am new to this site, and to HP so please excuse the NEWB ness of my questions. LOL. I work on Vipers at the shop Im at but, I own a 2003 srt4 that I am dying to get tuned the right way. I have owned the car since new, and seen what has came and gone for these cars in the matter of "tunning". Now that I have read some of the threads here, I am sure I will be able to find what I am looking for.

I would like to run some time attack events next year, and owuld like to gain a little more power. I have a stg one ECU in the cr now, with a APEX i piggy back. Yes I know OLD STUFF! haha. I would just like to know first, how does your products work for this car, and Vipers?? I would like to run 3 bar map, and tip sensors, 650 RC injs to have the fuel for the turbo I am running. I have already updated the fuel pump. Please be kind, I am new to this, LOL....

Quote:

---

Originally Posted by jchambers

Can we do anything with the 2013+ Challengers and Chargers yet?

---

Not yet, but we're working on it.

Quote:

---

Originally Posted by manny z

Hello. I would please like to state first that I am new to this site, and to HP so please excuse the NEWB ness of my questions. LOL. I work on Vipers at the shop Im at but, I own a 2003 srt4 that I am dying to get tuned the right way. I have owned the car since new, and seen what has came and gone for these cars in the matter of "tunning". Now that I have read some of the threads here, I am sure I will be able to find what I am looking for.

I would like to run some time attack events next year, and owuld like to gain a little more power. I have a stg one ECU in the cr now, with a APEX i piggy back. Yes I know OLD STUFF! haha. I would just like to know first, how does your products work for this car, and Vipers?? I would like to run 3 bar map, and tip sensors, 650 RC injs to have the fuel for the turbo I am running. I have already updated the fuel pump. Please be kind, I am new to this, LOL....

---

Ditch the Apex-i, connect to the car with HP Tuners, read out the tune, license it, and tune away. Simple as that.

You can rescale the MAP/TIP sensors just fine. I run 4 bar sensors and 1100cc injectors on my own car.

Quote:

---

Originally Posted by B00STJUNKY

Ditch the Apex-i, connect to the car with HP Tuners, read out the tune, license it, and tune away. Simple as that.

You can rescale the MAP/TIP sensors just fine. I run 4 bar sensors and 1100cc injectors on my own car.

---

Well just read all the information on this. Looks like I am going to invest in this. This is exactly what I have been looking for, for a good while now. Once I do get it, i will be asking questions on how the change a few things on my personal car..

One more question. Can I still keep the Mopar stg 1 ecu in the car and make all these changes?? Thanks...

Quote:

---

Originally Posted by manny z

One more question. Can I still keep the Mopar stg 1 ecu in the car and make all these changes?? Thanks...

---

Yes.

Is the Dodge Ram 04-2010 4.7L being supported as well?

Quote:

---

Originally Posted by Ls3sierra406

Is the Dodge Ram 04-2010 4.7L being supported as well?

---

Yes.

Thanks

can you give me the link of this version to download?

also, what about the scan parameters? are they the same of chevy ones?

You need to email support along with you're interface ID number and they will put it on your customer page.

Anything coming for the NA PTC's and Neon's of the same years?

Quote:

---

Originally Posted by MMGT1

Anything coming for the NA PTC's and Neon's of the same years?

---

Best thing to do is try and read them and if successful and you get the checksum error at the end, send the file to support. We have received a reads of non-turbo PT Cruisers and Neons but very few.

I have an 04 in the driveway I picked up a week ago, I'll see if I can and send it in

Hi Mark

Stupid question how to email support?

Thanks



Darren

http://www.hptuners.com/contact.php

Quote:

---

Originally Posted by Bill@HPTuners

http://www.hptuners.com/contact.php

---

Yup that was a stupid question Looked there but didnt see support:confused:

Quote:

---

Originally Posted by B00STJUNKY

Yes.

---

Thank you very much. Glad to hear this..

Anyone know if this works for an 2012 Dakota with a 4.7? It went under the Ram brand for the last year and as far as I know uses the same encryption as the 2012 Ram 1500.

Quote:

---

Originally Posted by rodslinger

Anyone know if this works for an 2012 Dakota with a 4.7? It went under the Ram brand for the last year and as far as I know uses the same encryption as the 2012 Ram 1500.

---

That's a tough one, as far as I know Dakota production ceased in 2011 with remaining stock being sold as 2012s. I looked up the wiring diagram and I see no reason for it not to work as it appears that it uses the same PCM as the RAM 1500. However if you have access to an MPVI, try to read it and if successful and you get the "Definition Failed to Load" error at the end send the read to support. We haven't received any reads form Dakotas after 2009 so I can't guarantee that it will work but it doesn't hurt to try if you have our interface. PM me if you have any more questions

Just a quick thanks guys for getting the PT supported for me! Silly little car I know, but its one I now own for a winter beater and a great way to get my feet wet with a Dodge/Chrysler here. Again, many thanks

I'm want to start tuning Dodge cars
I tried to see Dodge files but the file repository asked for HPTuner SN
I still did not decide to order the tuner
Maybe i will decide after i could see the files
is there any way to access to the Rep ?

Thanks in advance

Quote:

---

Originally Posted by wesam

I'm want to start tuning Dodge cars
I tried to see Dodge files but the file repository asked for HPTuner SN
I still did not decide to order the tuner
Maybe i will decide after i could see the files
is there any way to access to the Rep ?

Thanks in advance

---

Free demo; http://www.hptuners.com/articles/130327/

Russ Kemp

Getting checksum error on 2012 Ram 1500 5.7 has anyone tuned an R/T of this model?

Quote:

---

Originally Posted by Ls3sierra406

Getting checksum error on 2012 Ram 1500 5.7 has anyone tuned an R/T of this model?

---

You need to do what the error says and send the file into support. Usually means they haven't mapped that OS yet. Make sure you send the stock file, not one from a handheld.

Any progress on 2010 Challengers? Bill told me you guys pulled it off the supported list due to some unforseen problems.

Quote:

---

Originally Posted by IDRIVEAG8GT

Any progress on 2010 Challengers? Bill told me you guys pulled it off the supported list due to some unforseen problems.

---

They are supported in the beta. I will keep the first post of this thread updated as soon as we get a new car supported for Chrysler/Jeep/Dodge/Ram, so if its listed there we should have read and write support.

Quote:

---

Originally Posted by Mark@HPTuners

They are supported in the beta. I will keep the first post of this thread updated as soon as we get a new car supported for Chrysler/Jeep/Dodge/Ram, so if its listed there we should have read and write support.

---

Sweet thanks. I'll try again. I'll see if I can get it to pull, I have the beta, not sure if there's a new version though or not.

There's always a new version. In the .1400's now.

Quote:

---

Originally Posted by ElecTech

There's always a new version. In the .1400's now.

---

Dammit!

Hey BILLLLLLLLL!

Will it tune the TCM's in the 2012 Challenger?

thanks guys got that beta version and it connected perfectly and working good so far... greatly appreciated...

Thanks I sent in file and got the guys at HP tuners working did definitions on my OS and I'm tuning that model just wish we had TCM control available I guess one step at a time.

I can't get the 2.24 or the 2.25 scanner to work with my srt4? The 2.25 editor works with the car, but not the scanner? Any idea guys?