Printable View
I see PROLINK+ has a can-bus input and wondering how logging data from can-bus works.
I want to log Lambda and EGT data from can-bus. If my stand alone Lambda and EGT controllers inject their custom can-bus data onto the bus can I then log this using MPVI3 and PROLINK+?
I guess the question is can the VCM Scanner be configured to log multiple can-bus messages. I want to use 14point7 lambda controller and ecumaster egt2can controller. I see the software has build in support for 14point7 controller but how can I also add a second the egt2can controller.
Is no one doing any custom can-bus logging? I need this info before I commit to the purchase.
We don't have the support in-software yet to decode your own CAN frames. It's on our list.
If you send us the device name and CAN format, we can add it to the software.
Quote:
Originally Posted by Keith@HPTuners
Ok thank you, I will check what the CAN details are on the EGT controller. How often do you guys perform updates like these?
This is the controller: https://ecumasterusa.com/products/ec...nel-egt-module
Looks like the CAN details are available here: https://www.ecumaster.com/files/EGT2...N%20Manual.pdf
Can that device be configured to be 500 kb? It appears the PDF says its 1 Mbps
Quote:
Originally Posted by Keith@HPTuners
Yes, fully customizable even the message IDs can be modified.
Attachment 129414
Can VCM scanner be configured to simply log all CAN BUS traffic--even w/o decoding--just the raw data for other tools to analyze?
Would be awesome if generic can-bus logging was implemented.
Say you specify the frame id and which bytes of the message to log. Then optional math equation if you need to do some conversion/calculation based on the data in those bytes. The math equation could be done in real time or later at log view time, whichever is more efficient.