Printable View
Anyone have a basic 6.7 Powerstroke tune with deletes they would send me. Truck is a 2011. My friend did deletes thinking I could tune for him but I don't tune diesels. Just need something basic to get truck running good again after delete and safe to tow.
Will setting EGR and Regen tables to zero and disabling the codes work?
No! Already tried everything, have to deal with someone that understands hex files and binary
Was afraid of that. Only thing I could do is sell him a handheld from another company I use and get delete tune from someone to load on it I guess. If any of you can help me out with that send me a message.
Feel free to Shoot me a pm if you need some help on this topic
You cant flash a file with a different VIN so someone else's file wont help.
Need help I?m already deleted and get check sum error 2012 6.7 powerstroke deleted
With hex and user defined math perimeters
You get a checksum error when you read your already deleted truck? If so, send the file to support and see if they can fix it.Quote:
Originally Posted by Jeffrey Kavney
They told me it has to be returned to stock I?m going to send it anyway and see if that?s not there response because of EPA stuff I live in FL and have been getting ready for hurricane I?ll get it sent out and see where I am
Thanks
I?m up against the same issue any help would be much appreciated
Do you have a way to turn it back to stock? Like with the programmer that was used to delete it?Quote:
Originally Posted by Jeffrey Kavney
Yes and know. after last updated it would freeze while data logging and got an error code that I believe was around low voltage checked both batteries near 12.7 amps disconnected
The other reason is I?m deleted and it will go into limp mode and I am not familiar with hex
Not sure if I?ll be able to figure it out using user defined math. I sent file to HPT support hopefully they will help me out. The email I sent before I had file told me to take truck to ford but I would need to have it towed
Yes deleted
I can probably help you with the User Defined Parameters part of it, but you would need to have a good read with HPT first. You need to get it fixed either by hauling it to the dealer or sending me your PCM.Quote:
Originally Posted by Jeffrey Kavney
I would really appreciate it I?m going to get it flashed back to stock want me to PM you the file
I got the file should Email you or post it here