Printable View
I looked over on trans side and cannot see a thing on the Alison so figured I would I ask here if the early are supported? A buddy has a 2008 and says the trans shifts terrible. Lots of torque management totally chops the throttle on shifts and is not crisp. I build these for a living and the Alison 1000 series is a beast so with some trans tuning would really wake up a already powerful truck as it?s on an edge programmer. Sorry if stupid question i just can?t find anything
are you in advanced view?
i just downloaded an 08 6.6 auto file from the repository and could see all the transmission settings minus a diagnostics tab.
shouldn't need that tab though since all the tqm settings are in the trans main section.
I haven’t read his truck yet just wanted to be sure it’s there before got his hopes up. Will read it today and see thanks for the info. I will update the thread too so if others search its complete. I hate dead threads with no answers as so many of them when searching.
my 04 lb7 doesnt show a thing for transmission, wont read it or anything. i thought i had a problem with the calibration in the trans so i went to my dealer and both ecm and tcm have the most up to date calibration. if you figure something out update the thread pleaseQuote:
Originally Posted by lt1z350
the 2007 LBZ is an E35 ecu which i can see supports transmission settings the same as the 2008 E35b which is the LMM ecu. i can pull any 07 LBZ file and see the transmission section. if your read issues persist then i would contact support to open a repair ticket. send them your initial read entire file and send the vcm suite info log to get the best help.Quote:
Originally Posted by asap216
Had an 03 with a 496 and an Allison 1000 and it had tons of settings.