Printable View
Hello,
I need a little help. Im new to HP Tuners, i connect to my vehicle and try to do a Fast Learn but connot find the option under Special Controls. Im sure im doing something wrong so i figured i would ask for help instead of wasting time doing the wrong thing. Thanks again for the help. I installed a new tranny from ATS Diesel and they recommended i do a fast learn Thanks again for the help!
Tony
Send a ticket into support
https://www.amazon.com/icarscan-Diag.../dp/B0897PCTMX
A best friend for the RFE quicklearn.
An FYI, on the RFE?s, reflashing the ECM/TCM resets all adaptives to factory presets then you can just drive like a normal human and it?ll adjust the adaptives when called for.
https://techauthorityonlinedemo.extr...169905084A.pdf
Go to page 125 in the pdf in the above link and it?ll tell you all you really need to know on the quick learn and drive learn.
Cool. Thanks for the quick response. The ECM/TCM just got reflashed. So just drive it like normal and I should be good?Quote:
Originally Posted by Jim P
That?s what I do all the time with my 68RFE, never had an issue.
Jim, can that dongle write VINs and update mileage by chance?
I have the Launch Diagun V and it can (and does relearns, etc), but it cost me ~$650 instead of $235.
PS thanks for the link to the .pdf. Hadn't seen that one as I've mostly been playing with my 8spd until now.
Not sure, haven?t really used it beyond performing a quicklearn and changing country code to disable the DRL. I?ll take a look when I get a chance.
Looks like a negative on the mileage and vin change.