Printable View
So i got my hands on a 2018 mustang gt with the 10r80 on it, put a jlt intake ad tsp headers without cats, i tuned the intake and gave it a little extra timing, now i tried adding a little more rpm to see how it carried power past stock red line, but would get some transmission limiter and immediately after some communication error, so how are you guys making the 10r80 shift past 7100 rpm?
Attachment 83740
Attachment 83741
Attachment 83742
Lots of speed limiters in the transmission side. Have to raise them all.
wile tuning i tied to raise in transmission>general>limits:Quote:
Originally Posted by VPT
normal rpm limit
limit initial
rpm limit min
rpm limit max
xfer case high
xfer case low
left oss max vs shift ID and oss max vs gear alone because they already where over 7600 and at 7100 rpm i would get a communication error util i turned them back to stock
trans IPC set to disable
adjust shift scheduling as well to raise shift points and so on.
@mJolnir how much gained you with your tune ?