Anyone know what these row labels represent? This is on a 13 Dodge with a 65RFE. TIA
Attachment 102109
Printable View
Anyone know what these row labels represent? This is on a 13 Dodge with a 65RFE. TIA
Attachment 102109
Maximum shift pressure per shift pattern
Thank you, do we know what patterns relate to 0-21 & are all of them even used?Quote:
Originally Posted by Jim P
They all pretty much get used. I can post later what each one is.
Yes that would be very much appreciated!!!!!! Thank you so much!Quote:
Originally Posted by Jim P
Top to bottom:
1-2
1-3/1-2prime
2-3/2-2prime
2-4/2-3
3-4/2prime-3
4-5/3-4
5-6/4-4prime
4-6/3-4prime
3-5/2prime-4
4-2/3-2
4-3/3-2prime
4-1/3-1
2-1
3-1/2prime-1
3-2/2prime-2
5-4/4-3
6-5/4prime-4
6-4/4prime-3
5-3/4-2prime
N-1
N-R
R-N
Quote:
Originally Posted by Jim P
Thank you, this really helps, hopefully it will help others in the future as well.
I would set everything to 180psi except for the one that?s at 250. Don?t set the others above 180 unless you have a build transmission.
This is the exact reason I asked this question, it's a built trans but has stock input and output shafts & the builder asked that it not exceed 180 psi. Thanks again for your advice and help.Quote:
Originally Posted by Jim P
The max pressure limiting factor would be more to capabilities of the pump to build higher pressure and the valve body separator plate holding the pressure and not leaking, or so I would think.