2013 Audi S6 - Validate Checksum Failed While trying to open supplied stock file.

Message: Validate Checksum failed. You will be unable to save or flash this file. Controller: MED17.1.1 TC1797

ID: 2044785157
HardwareVersion: 1.4.0
ManufactureDate: 8/20/2018 9:44:31 PM
PartNumber: 6230
FirmwareVersion: 2.0.120
PoweredOnTime: 00:32:36
VehicleConnectedTime: 00:32:36


Protocol Info: ISO 15765-2, CAN, 500 kb/s

ECM: 7E8, CAN, ECM -EngineControl - MED17.1.1 TC1797, VAG
VIN: WAUJ2BFC1DN135814 - 2013 Audi S6 w/ Innovation Pkg., 4.0 L, 8 Cyl
Serial: 13290664
OS: 4G0906014B__0009
Calibration IDs: 4G0014B 0009AVAK
Calibration VNs: D0AAE84F
Basic PIDs: 50
Trouble Codes:
Controller Type ID By OS: 50030
Diagnostic Requirements: Init CAN 0x10 0x03
Scanning Methods: ISO 15031-5 Mode 0x01 Functional, ISO 15031-5 Mode 0x01 Physical, ISO 14229-1 Mode 0x22, CAN Listener

TCM: 7E9, CAN, TCM -TransmisCtrl
Calibration IDs: 4G1927156S 0011
Calibration VNs: 0000A9C1
Basic PIDs: 10
Trouble Codes:
Scanning Methods: ISO 15031-5 Mode 0x01 Functional, ISO 15031-5 Mode 0x01 Physical, CAN Listener

Received an email last night this issue will be corrected and released with the next software update.

Email about new Beta version received today.

I'm in!

Wooo!!!

Holy smokes these PCM's use a significantly different strategy than the LS based PCM's I am used to.