Can you tell DBW or DBC by the tune?

As the title states can you, by looking at the tune or info only and not knowing what it came out of other than VIN if it is a Drive by Wire or Drive by Cable setup? Looking at the idle area for IAC etc seems to be the same for both yet one was DBC and the other was DBW.

For P01/P59, go to System. Note the value of Platform Type (e.g. GMT800), then open the System Options table. Using the value of Platform Type, check what options are enabled/disabled in the System Options table based on the corresponding row.

If ETC column for the selected platform is 0 = DBC. If 1 = DBW.