I have a 2005 GTO with Twin turbos running 6psi, my scanner will not read above 105 kpa.
I have tried to delete all the PIDs and add a 2 bar channel but it never pops up with the option.
Any ideas of what i could be doing wrong?
Thanks
Printable View
I have a 2005 GTO with Twin turbos running 6psi, my scanner will not read above 105 kpa.
I have tried to delete all the PIDs and add a 2 bar channel but it never pops up with the option.
Any ideas of what i could be doing wrong?
Thanks
Do you have a 2 bar MAP sensor?
Are the e40's like the ls1 ecms, and have to log with 2 bar config?
Post tune and log.
So first off, its not a 2.5, its a 2 bar, so if your settings reflect a 2.5, that part of the issue. Now secondly, where did the sensor come from? Did you buy it from a gm dealer, or from some place like rock auto, which is notorious for selling counterfeit chinese knock offs.
Just a minor quibble... Rock Auto does not sell fake parts in AC Delco/Delphi packaging at AC Delco/Delphi prices. But if someone is stupid enough to think that a $8 'ULTRA-POWER' sensor is equivalent to a $50 AC Delco sensor, Rock Auto will let the stupid person buy the fake Chinese $8 sensor if that's what they really want.