Line Pressure for 6R80, what are you running? Any issues?
Stock Line pressure is 150psi. I've seen discussions about this and Eric replied that he saw 265 in some stock tunes. Anyone know what vehicle that is?
I believe in a repair video on the 6R80 someone mentioned the stock seals internally leak (slightly) at stock pressures and bumping line pressure too high can cause failure in the seals.
The tuning book I have says higher than 150 but I am reluctant to raise it until I hear back from folks run higher pressure without problems. I'd like to think 150 psi is a conservative 'max' pressure?