Printable View
I have a 2018 camaro ss and have installed the aem x series 30-0334 and my mpvi2 will not read wideband. I have watched videos on it and my sreen never looks the same. When i click on any of the 8 aem wb it has a key with a red circle and line going through it like it is locked. Any help would be greatly appreciated.
https://www.youtube.com/watch?v=QiFdE_sOD7U
it doesnt show in AEM, just follow this video.
I have watched it but when it brings up the options for adding it into the channel mine are way diffrentQuote:
Originally Posted by ZincGT
Repoll for supported parameters then click add chanel and type wb in the search filter. Screen shot that and post the screen shot.
I was having the same issues. I changed it to wideband 5 in the aem gauge, that made it stick out more.
Attachment 98749
Make sure you aren't trying to add it under external inputs.
I just plugged it in, hit "Repoll for Parameters" and then added the PID of "WB EQ Ratio #1" and it started working.
I do notice though sometimes when connecting VCM Scanner the WB PID will be grayed out and not reading anything. I just disconnect and reconnect and its fine. I dont know if I am starting VCM Scanner before the WB is ready or what but has happened a handful of times, no big deal.
Also remember to switch the polling rate on the WB channel to "10ms(100Hz)" for the fastest resolution once you have it setup.
I followed the instructions from the AEM video and made about 30 attempts with slight variations and had no luck. I just looked at the Tuning school video recommended by ZincGT and am in business first try. Thanks a bunch
Does the wideband controller show up in the "VCM Suite Info" log ( little blue button ) ?
Something else may be using the WB's default ECU number. You may need to change it to get rid of a conflict.
Quote:
Originally Posted by dr.mike
I?m having a similar issue. My ?WB EQ Ratio 1? is greyed out & I don?t have the option in my folders to add it. (I was sent a list of channels to monitor from tuner). Also as if HPT isn?t recognizing the wideband is there.
The AEM 30-0334 needs to be past the "warm up" phase, online, and showing an afr reading before attempting to connect with VCM.