Truck vs Car Throttle Body, Control, Tables, E67

Getting ready to swap an LS3 into my 5.3L Colorado. Will likely copy all the tune tables over from the GM crate LS3/430 E67 to my E67 to have a start and run tune.

The LS3 uses a protruding type throttle body. The truck intake, which I am retaining and transplanting on the LS3 via an L92 one, uses a different ETV motor layout. Do I need to account for anything when using my stock truck 87mm ETV in place of the LS3 one with motor off the side? Controls same?

Thanks.